Equipment

Rapid Manufacturing on Demand

With the continuous improvement of the complexity and precision requirements of parts, it has become an industry trend to apply CNC machining technology to process parts. In order to pursuit customers’ prototypes and machining accuracy of complex parts, Tik Precision has introduced a large number of high-speed 3/4/5-axis precision machining centers, lathes, grinders, EDM (Electrical Discharge Machining), wire electric discharge and other equipment. Coordinating Jingdiao’s featured technology and professional software, it makes high precision and ideal surface effect possible. You can choose the right manufacturing solution in Tik precision according to your design needs.

Core Equipment

JDGR400T

The JDGR400T we use is a “sophisticated” 5-axis high-speed machine from Beijing Jingdiao (JD). It is a precision five-axis high-speed machining center with micron-level capabilities. It has the advantages of high speed and low vibration, and has compound processing capabilities such as precision milling, boring, drilling and tapping. With built-in detection system, it can detect and correct the parts, cutting tool ,machine tool and lathe state .Thus the influence of the key element “inherent deviation” on the accuracy of the part will be greatly reduced. The JDGR400T is an expert in machining mechanical parts with complex structural features, discrete blank boundary deviation, and hard or difficult-to-cut materials (hardened steel, stainless steel, titanium alloy, etc.).

Equipment accuracy and stroke

Parameter

Standard

X/Y/Z axis motion positioning accuracy

0.002/0.002/0.002 mm

A/C axis motion positioning accuracy

6″/6″

X/Y/Z axis repeat positioning accuracy

0.0018/0.0018/0.0018mm

A/C axis repeat positioning accuracy

4″/4″

X/Y/Z axis working stroke

450/680/400mm

A/C axis rotation angle

– 120°~ 90°/360°

Table diameter

400mm

Maximum working load

150kg

Typical Case

AFMING GMU-800

The GMU-800 Tik Precision use is a high-rigidity 5-axis linkage machining center, which is used in various industries such as the automobile industry, industrial equipment, and mold industry. It is currently one of the few 5-axis linkage machining centers capable of heavy-duty milling. It is equipped with German spindle technology and high-rigidity ,high-torque gear transmission A/C cradle turntable technology. Combined with precise analysis and optimized lathe structure, it is beyond qualified for the high-speed, high-efficiency, and high-precision processing requirements of various materials.

Equipment accuracy and stroke

Parameter

Standard

X/Y/Z axis motion positioning accuracy

0.004/0.004/0.004 mm

A/C axis motion positioning accuracy

10″/5″

X/Y/Z axis repeat positioning accuracy

0.004/0.004/0.004mm

A/C axis repeat positioning accuracy

10″/5″

X/Y/Z axis working stroke

850/950/550mm

A/C axis rotation angle

 ±120°/360°

Table diameter

800mm

Maximum working load

600kg

Typical Case

Testing Equipment

Hexagon CMM

The quality department of Tik Precision is equipped with Hexagon Inspector series 3 coordinate measuring machines, which can be widely applied to the dimensional quality control of prototypes and end-use parts . The Inspector measuring machine can be configured with a variety of probing systems, which can not only support the commonly used point-to point measurement, but also can choose to configure the scanning probe for uninterrupted continuous scanning measurement

Equipment accuracy and stroke

Parameter

Standard

Accuracy

0.0015*0.0015*0.0015mm

Stroke

800*1000*600mm

Start your new project now !